- USPS postcards are cards from 3½ × 5 up to 4¼ × 6 inches, 0.007 to 0.016 in thick.
- Letter-size goes up to 6⅛ × 11½ inches and ¼ inch thick, at 3.5 oz or less.
- A 6 × 11 card is letter-size (not a postcard) and must be at least 0.009 in thick.
- Commercial letters must have a length-to-height ratio between 1.3 and 2.5.
- EDDM Retail pieces must be longer than 10½ in, taller than 6⅛ in, or thicker than ¼ in.
The USPS size limits
| Shape | Minimum | Maximum | Thickness |
|---|---|---|---|
| Postcard | 3½ × 5 in | 4¼ × 6 in | 0.007–0.016 in |
| Letter | 3½ × 5 in | 6⅛ × 11½ in | 0.007–¼ in (0.009 in if over 4¼ × 6) |
| Flat | Bigger than a letter in any one dimension | 12 × 15 in | Up to ¾ in |
Common contractor sizes
| Card size | How USPS treats it | Notes |
|---|---|---|
| 4 × 6 | Postcard | Least room for your offer |
| 5.5 × 8.5 | Letter | Ratio 1.55, fine for automation |
| 6 × 9 | Letter | Ratio 1.5 |
| 6 × 11 | Letter | Ratio 1.83. Big enough to stand out. Also qualifies for EDDM as a flat. |
| 8.5 × 11 | Flat | Too tall for letter-size (over 6⅛ in) |
Aspect ratio and machinability
USPS sorts letters on machines. For commercial (bulk) letters, the length divided by the height must be between 1.3 and 2.5. A 6 × 11 card is 11 ÷ 6 = 1.83, comfortably inside. A square card fails the ratio. Mailed at retail, a piece outside the ratio is treated as nonmachinable and pays an extra surcharge.
Cards also need to be rectangular, flexible enough for the machines, and thick enough for their size: at least 0.009 inches for anything larger than 4¼ × 6.
EDDM size rules
Every Door Direct Mail Retail only takes flats, but its threshold is different from the general flat rule. An EDDM Retail piece has to be longer than 10½ inches, taller than 6⅛ inches or thicker than ¼ inch, and weigh 3.3 ounces or less. A 6 × 11 card meets the length test. Because it's still within letter-size dimensions, it has to carry an "EDDM" marking right after "ECRWSS" in the indicia area.
What has to go on the card
- Address area: on addressed mail, the recipient address goes on the address side, usually in the lower right, with room for USPS barcodes below it.
- Postage: a stamp, meter mark or permit indicia in the upper right. Bulk mail uses a permit indicia printed on the card.
- Clear zones: keep the bottom of the address side free of design so the barcode area stays readable.
- Return address: recommended. For mail with no return or forwarding service, like EDDM, nothing comes back to you.
Before printing, ask your mail service or the post office to check a proof against current USPS rules.
Questions
What is the largest size USPS counts as a postcard?
4¼ by 6 inches. Anything larger, up to 6⅛ by 11½ inches, is a letter.
Is 6 × 11 a postcard size?
It's a common postcard format, but USPS treats it as letter-size, not a postcard. It also qualifies for EDDM as a flat.
How thick does a 6 × 11 postcard need to be?
At least 0.009 inches, because it's larger than 4¼ by 6 inches. Most postcard stock is well above that.
Why does aspect ratio matter?
USPS sorting machines need letters with a length-to-height ratio between 1.3 and 2.5. Commercial letters must meet it. Retail pieces outside it pay a nonmachinable surcharge.